SCHÜTTGUT / SOLIDS 2017
On 10th and 11th of May 2017, the 8th edition of SOLIDS Dortmund will take place at Dortmund Westfalenhallen. SOLIDS Dortmund is one of the leading trade show for powder and bulk technologies in Germany. On display are the latest products and new solutions for conveying, storing, packaging and transportation of bulk materials.
As one of the leading handling and conveying equipment manufacturer SIGMA presents its sampling units and assemblies at the exhibition for powder and bulk technologies in Dortmund.
Our team would be glad to welcome our clients, as well as the new customers and suppliers among the visitors of SOLIDS 2017.You will find us in the hall 6, stand S:05-6.
Please contact us, if you need an invitation card or would like to make an appointment for a personal meeting.
SIGMA-Belt pulley on its way to BAUMA 2016
Our „Model“on its way to Munich. Please visit our FAM-stand at BAUMA 2016, Exhibition Hall C2 / Stand 413 from 11/04 to 17/04/16.
SIGMA- bearing seal for extremely rough operating conditions
The use of rolling bearings in extremely rough operating conditions often raises additional problems. At best a permanently lubrication of seals is needed, at worst rough operating conditions cause bearing failure. The new W V TAC bearing seal made by SIGMA helps you to solve this problem. The shaft seal of the new W V TAC bearing is situated directly in front of the rolling bearing.
SCHÜTTGUT / SOLIDS 2015
On 4th and 5th of November 2015, the 7th edition of SOLIDS Dortmund will take place at Dortmund Westfalenhallen. SOLIDS Dortmund 2015 is going to be the leading trade show for powder and bulk technologies in Germany in 2015.
It is going to be the first time that SIGMA presents its sampling units and assemblies at the exhibition for powder and bulk technologies in Dortmund.
After successful start at POWTECH Nurnberg last year, our team would be glad to welcome the new customer and suppliers among the visitors of SOLIDS 2015.
You will find us in the hall 6, stand R-24.
Our new milling machine
The recent startup of the new milling machine TERUS made by FPT allows us to produce high-quality mechanical components according to the customer requirements.
- X-Y-Z-Axes up to 2500-2000-2000 mm
- rotary table ( 12 tones) 2000x1500 mm
- universal automatic head
Project „Fort Hills Surge“ is completed!
The last belt pulleys for the „Fort Hills Surge“-Project were delivered to the customer at the end of June 2015. The complete order included calculation, technical design and production of 18 main and 15 spare belt pulleys for the FAM-project in Canada.
The total weight of the 23 belt pulleys is app. 435 tones, the diameter varies from 1,325 mm to 1,524 mm.
One of the special challenges was the polyurethane lagging, successfully mastered by our long-standing partner Tip Top Oberflächenschutz Elbe GmbH in Wittenberg. To prove the lifting points each of the 23 belt pulleys have been tested with 5 t additional weight.
Automatic sampling system for iron ore made by SIGMA
After the delivery of two coal samplers to Mannheim, Germany and Maasvlakte, Netherlands our first automatic sampling system for iron ore was sent to Canada this year.
It consists of hammer sampler, dosing unit, mill, two dividers and a sample collector and is part of the ship loader in Baffinland, Canada.
POWTECH is the world’s undisputed number one for powder, granule and bulk solids technologies.
For the first time SIGMA presented its sampling units and assemblies on POWTECH 2014.
We would like to underline the outstanding interest of POWTECH-visitors to our production during all three days.
Among new business contacts we not only found potential buyers but also new suppliers and interesting business partners.
We are really glad about positive feedback and are certain that this experience will help us to reach the new level in production and distribution of sampling units.
"Sigma_GTS" goes into operation
Software package developed by SIGMA, for belt pulleys engineering and calculation is currently being tested under practical conditions.
With "Sigma_GTS" we have got the possibility to calculate and design our products with even higher accuracy and quality - in accordance with operating requirements, high standards and proven calculation methods.
All calculations and documentation are included.
Belt pulley on its way to BAUMA 2013
Our „Model“on its way to Munich. Please visit our FAM-stand at BAUMA 2013, Exhibition Hall C2 / 403 from 2013-04-15 to 2013-04-21.
The purchase of a new WEILER lase gave us the possibility to increase vertical integration of the company and to ensure the highest quality of our products. Technical parameters of the machine – distance between centers 4.000 mm/diameter of the face plate 1.400 mm – allows machining of workpieces with up to 12 t weight.